Material properties and prices introduced

A, fabric
1 yard = 91.4 * 135cm 1 英寸 = 25.4mm one square foot = 30 * 30cm from shoes manufacturer1.Common PU: smooth, poor ventilation, relatively close leather, the quality is better. 1 yard 32 yuan or so, utility rate of 90%.
2, sheep grain PU: surface looks oily, like sheep embossed pattern. Lines relatively small, with a matte feel, do sheep grain PU lining did not increase the bottom buckle cloth plush feeling about 15 yuan / yard, so there is tension fabric are good posts about 17-18 yuan buckle fabric / yard , fine lines, smooth surface feels smooth to the touch, there are many small holes price is 17-20 yuan / yard
3, the metal PU: uneven color, very bright. Surface-layer film, relatively smooth, easy to burst, will fade metal PU1 yard about 18 million. Peritoneal surface layer of metal is characterized by breakable \ easy to fade \ not viscose, stretch shoes need polishing, usually 20 yuan / yard, radium color PU (overlooking a layer of membrane surface, such as the disc surface with a layer of colorful feeling) is probably 30 yuan / yard
Waxing PU: surface layer of white powder-like, Sassafras what has color effects, only one step (direct hit wax polish on it), about 30-35 yuan / yard
4, Brush PU: surface like pressure off, a wrinkle, the surface layer of powder, color, color machine to use rub rub rub color after color. 1 yard for about 30 yuan. Need to go through color processing requires three steps: Sassafras glue (glue on burning wax) --- color (throwing colored wax) --- polishing (on polishing wax)
5, Satin: do not paste buckle easily torn cloth, then a line of fine fibers. Oil can be divided into small (surface more oil), Ma Ding (rough), bamboo Satin (a vertical bar). To buckle cloth over eighteen pounds, on the surface does not need glue to Sassafras gum syrup processed, distributed material Satin (7-8 yuan / yard) and PU Satin (surface looks like a sardine in fact PU material
6, linen: sparse, feel rough, not suitable for pick edges, chromatic aberration is relatively large, metal hemp 25-30 yuan / yard, printed linen (part of special materials) 30-40 yuan / yard.
7, canvas: density is good, canvas than the rough denim, fabric line organization is well-shaped. 1 yard twenty yuan or less.
8, Denim: Denim wiring strip stripe stripes and twill organization organized than canvas soft, color is heavy. PU Cowboy (surface layer of metallic material sense) 30-40 yuan / yard, Washed Denim (colors are washed shallow) and general cowboy about 15 yuan / yard
9, flannel: surface layer of fluff ordinary flannel is 1 yards ten yuan; hand rubbing discoloration of good quality will be misplaced flannel 1 yard of about 20-30 million. shoes factory10, stretch fabric: flexible, scalable. 1 yard of about 30-40 million.
11, the first layer pigskin: small pores, smooth and shiny. About 3 yuan more than a foot, utility rates 70%.
12, two-story pigskin: large pores, good ventilation, dark in color. Foot about 3 yuan, utility rates 70%.
13, the metal burst: a uniform grain, more brighter. Looks like metal with metallic luster as one yard seemed to split about 20-30 million.
14 Litchi: Like Lychee embossed leather. There are matte and gloss of the points. 1 yard of about 30 yuan.
15, Cowboys PU: is a new material, constituting the surface is attached to a layer of denim uneven PU. 1 yard of about $ 35.
16, wiping coke PU: also called waxing PU, color, attached above a layer of powder. Hair elastic eraser end of a PU PU expensive than the cloth at the end. 1 yard of about 30-40 million.
19, Bala Pi: It is a kind of special materials, pressed metal with cloth 28 yuan / code is usually done at the bottom surface and the paste from men shoes manufacturer