Footwear basics confluence of great value-Two

8, how to identify quality leather shoes?

The quality of identification of a pair of shoes, from the appearance and internal indicators focus on two aspects. Due to intrinsic indicators often need the help of testing instruments, for a consumer is concerned, from the appearance of up to identify the quality of shoes has more practical significance. From the appearance, mainly through the shoes of the material (including uppers, soles, shoes) acting both good and bad aspects of quality and to identify good quality leather ring.shoes manufacturer

(1) vamp (help): leather upper is one of the main components. For smooth leather, depending on whether it is soft and plump, press the upper hand, does appear loose surface phenomenon, a good shoe should be plump soft, comfortable feel, gloss uniformity, no loose surface phenomenon. Suede uppers for shoes, you should be careful to check whether its a short nap and uniform, the color should be consistent with the upper part of the shoe is, it is for reinforcing upper, upper extension to prevent deformation and improve the use of Jiaogan . Therefore, a good shoe materials (such as real leather shoes) should have a good feel, breathability and humidity and wet bar, and difficult to bleaching. In sewing, the shoe should not have wrinkles and fat edges.

  (2) insole: leather shoes men usually end with the latter half of the inner pad or heel pads. Female shoes covered insole with full pads. Maintaining the insole sock clean, covering the inner end of irregularities, in order to improve foot feeling effect. Therefore, the insole should have good resistance Moisture absorption. In acting on the insole should be adhered to, including the flat bottom, the crease can not have floating phenomenon.

(3) outsole: From the outside, the outer periphery of the bottom should be closely combined with state bonding without voids, bottom flat.

(4) Shoes limit: whether low-heeled or high-heeled, first look at whether its shoes with natural flush. For more than half of high-heeled women's shoes in terms of the following two points is more important: First, the heel should be firmly attached to the inner bottom, moving around, should not shake; Second palm heel should not be less than underside.shoes factory

(5) in the end: see the insole material, leather is best. On the other hand, to hand strongly pushed waist and crotch, representing part of the instep when wearing shoes, motionless better. In the action of this force, such as shoes bead deformation, described problem with the quality of the shoe.

(6) Stability: the shoes on a flat surface, shoes should immediately stationary, such as stability shoes, which is one of the basic conditions for quality shoes.

(7) side of the check: the shoes on a flat surface, shoe outsole (forefoot) and the flat contact point should be in the middle, there should be appropriate Alice head toe, heel and the bottom should be completely honest with the plane.

(8) Front check: the line of sight and the outer end of the same height, see the outer end of the inner and outer dimensions have not tilt. Should be basically the same, to maintain balance.

(9): checking from behind: the heel should be honest, after the sutures should be upright.

(10) Neither shoe Contrast: After completing the above aspects checks, need to carefully compare the two shoes of the length, height and shape) whether identical or symmetrical, but also look bright, color is consistent.women shoes manufacturer