footwear inspection criteria

Footwear manufacturing procedure demands - shoe inspection requirements
Footwear examination requirements
A Size: 1, left foot the same dimension criterion; 2, the actual footwear dimension (length) the exact same area coating, the bottom platter of the exact same size.
2 open plastic: 1, footwear does not have lengthy extremely 2mm, deep ultra-1.5 mm, simply glue a plastic location; 2, outsole and uppers after that encountered glue solid, no cracks, no spaces; 3, tensile screening 2.5 kg / per sq. cm.
Three damage: 1, shoe toe, mid lateral, front eye display area is broken; 2, in the inside to aid various other non-display areas, could not have greater than 2 mm2 area of damage; 3, Houli neckband, footwears tongue could not have actually cracked; 4-pin vehicle could not have an auto broken location, tongue tag could not have cracked; 5, the end damage lack of material, longer than 1mm, 1.5 mm large unqualified; 6, shoelaces damaged failed.
4 solid: 1, the tongue has to be securely taken care of, without losing; 2, webbing should be safely dealt with, without shedding; 3, drop, hallmarks, letters may not have gone over; 4, impassioned, company could not have gone over; 5, transform published cloth requirement dimension or could not have actually shed 6, components car line company may not have actually come off; 7, metal buckle fracture deformation, loose, no bottom buckle, Diaoqi unqualified; 8, drop buckle tough, simple to carry out, not certified; 9, the end mark is not tightly connected unqualified; 10, single combination is not sturdy delamination error.
5 color: 1, single face of claimed parts to help the whole pair of footwears left foot balanced components, could not have colour; 2, the end left foot can not have shade outsole sidewall can not have chromatic aberration, bottom flower serves, a small colour; 3, add-ons, such as hallmarks, ribbon, drop, electric rust, high frequency, extreme colour printing is not enabled.
6 automobile line: 1, any sort of parts, auto damaged auto fell short, no profit failing; 2 sewing needles out unqualified; 3, double-needle wiring, hefty needle, string line, line spacing seriously uneven, not smooth unqualified; 4, parts of the force, the main components of the bottom line, generally also loose, noodles appeared unqualified; 5, frames, sound severely unequal, the line is not smooth, seriously affect the look, unqualified; 6, the auto left foot line incorrect color, solitary needle, double needle does not fail.
Seven elevation: 1, toe height does not exceed 1.5 mm, adhered to by a degree of not greater than 2mm, the midsection compared to 3mm unqualified; 2 big reduced shoes on a level surface uneven, shoes concerning swing Camber than 2mm failed.
8 lengths: 1, failed to help the previous length ultra-2mm, 2, tongue left open length error of greater than 3mm unqualified; 3, ultra-3mm lengthy outsole unqualified; 4, ultra-2cm lengthy shoelace finishes failed.
Nine jagged Positive: 1, ultra-1.5 mm toe altered unqualified; 2, followed by the ultra-2mm skew unqualified; 3, shoes magic buckle mouth, alter 3mm fell short.
Ten small: 1, toe vamp (within the head) Size Long ultra-2mm, 2mm ultra-wide error; 2, the corresponding parts of the evident dimension of the left foot, unqualified; 3, after the collar foam package, neckband lining left open, obviously size, he failed.
Eleven crease: 1, within the physique of the shoe influence the appeal of the head participant wrinkling, unqualified; 2, huge reduced published at the end, sidewall wrinkling curling have an effect on the look, unqualified; 3, uppers and outsole made at the following edge, wrinkling unqualified; 4, inside wrinkling, he fell short.
Twelve pinhole: 1, outside, inside the head, the eye outside aid, could not have a pinhole; 2, and median heel, not apparent at permitting a pinhole, are each no more than 2 holes.
Thirteen products: 1, the exact same pair of shoes, the matching parts of various materials, unqualified; 2, the corresponding parts of different colours, products failure; 3, material colour, thickness, design, fluff, embellished in different ways, unqualified; 4, the material cut to different, unqualified; 5, the product area fracture, fracture aid, finish off, lightening, staining, unqualified;.
from shoes manufacturer shoes factory  women shoes manufacturer